Leaders
in
Innovative
Stable Design

Contact Us :

Superior Sheds & Stables

PO Box 120
Canungra 4275
Queensland
Australia

QBSA Licence : 1054363

ABN: 65109325304

Phone :

Office & Fax : 07 5543 5953

Mobile (David) : 0409 435 953

Mobile (Linda) : 0438 435 955

E-mail :

back

Stable Panels

But when looks are everything it's hard to go past Tasmanian Oak. This timber gives less shrinkage than most other timbers while resisting splintering and retaining flexibility and light weight. Tassie Oak has a wonderful natural colour but can be easily stained to suit any colour scheme.

Superior Sheds & Stables can measure, design, manufacture and install panels to suit the needs of your stables or we can build to your specification and leave the rest to you.

We typically make panels with the inset chosen from one of three materials. For the budget conscious form ply is very cost effective and for outdoor areas, conveyor belt rubber is a good option.

General Specifications
Size		One piece - made to measure
Frame		Duragal Steel - 50mmx50mmx2mm
Inset Frame		Steel - 25mmx2.5mmx2mm
Pipe		20NB pipe - 27mm outside measurement Welded at 100mm centres
Doors		Ball bearing hinges welded to main frame
Handle		Slide up handle with dual locks for extra stability and strength
Inset	Timber	Tasmanian Oak - tongue & groove 132mmx31mm
	Ply	Form Ply 17mm Black
	Rubber	Conveyer Rubber 6mm

Extras

Talk to us about any feature you may need including :

Sliding doors.
Spinning feed bins that lift off (plastic or galvanized).
Other/extra feeder positions
Automatic waterers.

Full height insets in timber, rubber or ply.
Mesh used instead of pipe (same cost).
Sawdust stoppers under doors.
Hinged panels to allow bobcat entry.

Maintenance

To ensure the longest possible life for the panel it is necessary to regularly check this barrier and if necessary, clean and reapply sealants.

Door hinges should be greased annually or as required.

Stable panels are at risk of rust and/or rot due to the presence of horse urine or possible flooding such as might be caused by a leaking waterer. Proper application with wide coverage of suitable sealants over the joints during installation is essential.

For panels not installed by Superior Sheds & Stables, we supply a tube of sealant and a tin of bitumen paint per stable for this purpose.

Prices

Panel Style 1A
Panel Style 1A	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1700	$1700	$1200
Rubber	$1700	$1700	$1200
Tas Oak	$2300	$2300	$1750
Tas Oak & Powdercoat frame	$2900	$2900	$2250
Features	Full height panel.

Panel Style 2A
Panel Style 2A	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1800	$1800	$1200
Rubber	$1800	$1800	$1200
Tas Oak	$2300	$2300	$1750
Tas Oak & Powdercoat frame	$2900	$2900	$2250
Features	Full height panel with scalloped door

Panel Style 1B
Panel Style 1B	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1900	$1900	$1500
Rubber	$1900	$1900	$1500
Tas Oak	$2500	$2500	$2100
Tas Oak & Powdercoat frame	$3100	$3100	$2700
Features	Three quarter height panel with 45° sides. Minimum bar height - 300mm. 75mmx75mmx3mm post either side of door.

Panel Style 2B
Panel Style 2B	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1900	$1900	$1500
Rubber	$1900	$1900	$1500
Tas Oak	$2500	$2500	$2100
Tas Oak & Powdercoat frame	$3100	$3100	$2700
Features	Three quarter height panel with curved sides. Minimum bar height - 300mm. 75mmx75mmx3mm post either side of door.

Panel Style 3B
Panel Style 3B	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1900	$1900	$1500
Rubber	$1900	$1900	$1500
Tas Oak	$2500	$2500	$2100
Tas Oak & Powdercoat frame	$3100	$3100	$2700
Features	Three quarter height panel with stepped angled sides. Minimum bar height - 300mm. 75mmx75mmx3mm post either side of door.

Panel Style 4B
Panel Style 4B	Stable Front - centre door	Stable Front - side door	Divider
Ply	$1900	$1900	$1500
Rubber	$1900	$1900	$1500
Tas Oak	$2500	$2500	$2100
Tas Oak & Powdercoat frame	$3100	$3100	$2700
Features	Three quarter height panel with rounded sides. Minimum bar height - 300mm. 75mmx75mmx3mm post either side of door.

Panel Style 1C
Panel Style 1C	Stable Front - centre door	Stable Front - side door	Divider
Ply	$2300	$2300	$1500
Rubber	$2300	$2300	$1500
Tas Oak	$2900	$2900	$2100
Tas Oak & Powdercoat frame	$3500	$3500	$2700
Features	Full height scalloped front. Bottom of scallop - 1500mm to 1600mm Top of scallop - 2100mm ** Steel post - 75mmx75mmx3mm - from slab required either side of door.

Panel Style 2D
Panel Style 2D	Stable Front - centre door	Stable Front - side door	Divider
Ply	$2300	$2200	$1500
Rubber	$2300	$2200	$1500
Tas Oak	$2900	$2800	$2100
Tas Oak & Powdercoat frame	$3500	$3400	$2700
Features	Full height curved panel. Bottom of curve - 1500mm to 1600mm Top of curve - 2100mm. ** Steel post - 75mmx75mmx3mm - from slab required either side of door.

Panel Style 3D
Panel Style 3D	Stable Front - centre door	Stable Front - side door	Divider
Ply	$2300	$2200	$1500
Rubber	$2300	$2200	$1500
Tas Oak	$2900	$2800	$2100
Tas Oak & Powdercoat frame	$3500	$3400	$2700
Features	Full height curved panel. Bottom of curve - 1500mm to 1600mm Top of curve - 2100mm. ** Steel post - 75mmx75mmx3mm - from slab required either side of door.